What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 08:44
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then asserts :
What does a fuse do?
The Ocean Is Getting Darker, Threatening All That Lives Within - ScienceAlert
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Edit 2024–10.
Why do I sweat so much after applying moisture or sun screen on my face? I have normal skin.
There are three different concepts here that are getting confused.
It seems Mohan does not understand the difference between a comment and an Answer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Have you ever had a secret crush on anyone?
The MOV will conduct when the voltage exceeds 50% of line voltage.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Can you tell me a depressing story?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One is “what exactly is in a ‘surge protector’ ? ”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
How to watch the 2025 Tony Awards - CNN
The third is lightning and “how it gets conducted into a home.”
Barnstars:
Here is a simplified AC power diagram.
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why does it matter so much to atheists that God doesn't exist?
nine
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Moving sucks, but decluttering helps - The Verge
The bolt then partially travels down the line to your home.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Sophia Bush Says She Endured “Every Kind of Abuse” on Show Due to Older Man - The Hollywood Reporter
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
(Dc diagram shown, AC is similar).
An AC voltage/ current source, and an ac inductive load.
346 Million-Year-Old Fossil Rewrites the Story of Life on Land - SciTechDaily
This is where the MOV conducts again, and dissipated the energy.
2024–10–14 [Omar Gharbi Omar Gharbi ]
First Sentence:
How can I get over a break up?
He then describes Rainy Season and Lightning.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These are simplified answers to the original question, and does not change anything I wrote above.
Why do older men like to get anal sex?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
But it can get overloaded, and no longer works.
Liam Coen: Defensive coaches asking for more of Travis Hunter - NBC Sports
A circuit breaker is similar, but is resettable.
One
A fuse is a non-resetable over current circuit protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
so, what happens?
It also is a device that limits the change in current flow.
what exactly is a ‘surge’ protector?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–10[John johnson John Johnson ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This one hit behind the barn.
At least they know the answer if they wanted it.
The other is “what does a “fuse” do?”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then describes the function of a fuse.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There are two important concepts here.
This device then solves the entire problem.
a photo is worth a thousand words.
[old diagram got deleted by accident]
Now when you have a certain ac resistance, then a current flows in a loop.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
Upvotes:
eight
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What is lightning?
Because the load is inductive, the current lags the voltage.(by a bit).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
[image of Common-mode choke]
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
For this case there are devices called Metal oxide varistors (MOV).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).